Intel Core i7-6950X Processor Extreme Edition (25M Cache, up to 3.50 GHz) Intel Core i7-6800K Processor (15M Cache, up to 3.60 GHz) Intel Xeon Processor E5-1620 v4 (10M Cache, 3.50 GHz) Intel Xeon Processor E5-1660 v4 (20M Cache, 3.20 GHz) This download is valid for the products listed below: Intel Core i9-7900X/i7-78XX processor family for socket LGA 2066 with X299 chipset Intel Xeon E5-1600 v4 product family (single socket only) Intel Core i7-69xx/68xx processor family for socket LGA 2011-v3 (single socket only) This package supports the following processor families: My only Intel-based server is an HP Microserver Gen8 with stock Celeron G1610T, which doesn't incorporate turbo boost - in fact, it hardly changes clock speed at all (range is 2.128 GHz to 2.3 GHz).- Run and signed WHQL on RS3 to have RS3 compatible driver It doesn't really bother me and I have nothing more to add - it's just another data point and a message that you are not alone. It ramps up and down between 1.8 and 3.9 GHz as expected but when running similar tests to yours and johnnie.black's I can't make it go faster than 3.9 GHz, despite it's "turbo boost" frequency being 4.1 GHz. One of my servers has an AMD A6-6400K whose nominal frequency is 3.9 GHz. It was changed at some point because the utilization percentage is believed to be more meaningful.įWIW, I'm following this thread out of curiosity. I don't think you can make the dashboard show CPU frequencies in 6.2.x. (For clarity, I don't mean this issue described in this thread) One thread I was involved with actually ended up as being three completely different issues in the end.Īlso does anyone know how to make the dashboard show the cpu frequencies in 6.2.4? I've seen screenshots on 6.1 systems with the cpu frequencies instead of percentages and I would rather see that than a utilization percentage (on a side note, I wonder if the percent utilization would even go past 100% if turbo boost was working?). The forum is littered with threads of people with the same issue. It's because of things like this that so called thread hijacking are discouraged unless you're 100% certain that it's the same issue and even then it's prudent to at least provide evidence that it's reproducible on your hardware. Took a while to get to the bottom of and caused a great deal of head scratching and we never did find an explanation. But it did make me chuckle.Īs a sidenote, archedraft and myself also have (or at least had) identical hardware and were working on some virtualisation stuff, and we realised that the way our systems allocated resources were completely different. My power supply is a corsair cx430 and my system draws about 200Watts so I don't think that's an issue either.Ĭrazycam425, if you look at the thread as an outsider, it would appear that you have provided extensive troubleshooting information and results of investigations, and brn2337 has just posted once, and that immediately after Zonedivers post and not before that. So I'm not sure what is going on with that machine either.) However, my dedicated machine which has the same power supply and large heatsink to prevent thermal throttling, only ever boosts to around 2.93 ish Ghz and I have never seen the 3.2 its supposed to get according the ark. (On a separate note- My dedicated windows 10 machine does allow the cpu to boost and all my bios settings are exactly the same for both machines. Also I have the same motherboard and cpu in a dedicated windows machine so if there is anything that you can think of that I would need to test on that machine that would help figure this issue out please let me know. If I run a vm with all cores ( and maxi it out with handbrake the hottest my system gets is usually around 160 F so thermal throttling shouldn't be an issue. Thank you for your help so far!Īlso I wanted to provide a little more info to see if this helps: Then I tried the 4 lines you showed me from your system and it says "No such file or directory" so I'm not sure what to make of that either? Can you explain to me or suggest what else to try? I really am would like to figure this turbo boost thing out because the extra boost would help with emby video transcodes and the higher clock speed would help with the games i play on my vm's.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |